Display Schedule Reboot; Display System-Failure - H3C S5120-SI Series Command Reference Manual

If you modify the system time within 16 minutes, the configurations of scheduled automatic execution of
the batch file will become invalid, and then when you execute the display schedule job command
again, the system displays nothing.

display schedule reboot

Syntax
display schedule reboot
View
Any view
Default Level
3: Manage level
Parameters
None
Description
Use the display schedule reboot command to display the device reboot time set by the user.
Related commands: schedule reboot at and schedule reboot delay.
Examples
# Display the reboot time of a device.
<Sysname> display schedule reboot
System will reboot at 16:00:00 03/10/2006 (in 2 hours and 5 minutes).
The above information indicates the system will reboot at 16:00:00 on March 10, 2006 (in two hours and
five minutes).

display system-failure

Syntax
display system-failure
View
Any view
Default Level
3: Manage level
Parameters
None
Description
Use the display system-failure command to display the exception handling method.
Related commands: system-failure.
1-13