1
PoE Configuration Commands
PoE Configuration Commands
apply poe-profile
Syntax
apply poe-profile { index index | name profile-name }
undo apply poe-profile { index index | name profile-name }
View
PoE interface view
Default Level
2: System level
Parameters
index index: Index number of the PoE configuration file, in the range 1 to 100.
name profile-name: Name of the PoE configuration file, a string of 1 to 15 characters.
Description
Use the apply poe-profile command to apply the PoE configuration file to the current PoE interface.
Use the undo apply poe-profile command to remove the application of the PoE configuration file to
the current PoE interface.
Note that the index number, instead of the name, of the PoE configuration file is displayed when you
execute the display this command.
Related commands: display poe-profile, apply poe-profile interface.
Examples
# Apply the PoE configuration file named forIPphone to the PoE interface GigabitEthernet 1/0/20.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/20
[Sysname-GigabitEthernet1/0/20] apply poe-profile name forIPphone
[Sysname-GigabitEthernet1/0/20] display this
#
interface GigabitEthernet1/0/20
apply poe-profile index 1
#
return
1-1