Password - H3C S5120-SI Series Command Reference Manual

View
NAS ID profile view
Default Level
2: System level
Parameters
nas-identifier: NAS ID, a case-sensitive string of 1 to 20 characters
vlan-id: ID of the VLAN to be bound with the NAS ID, in the range 1 to 4094.
Description
Use the nas-id bind vlan command to bind a NAS ID with a VLAN.
Use the undo nas-id bind vlan command to remove a NAS ID-VLAN binding.
By default, no NAS ID-VLAN binding exists.
Note that:
In a NAS ID profile view, you can bind the NAS ID with more than one VLAN.
A NAS ID can be bound with more than one VLAN, but one VLAN can be bound with only one NAS
ID. If you bind a VLAN with different NAS IDs, only the last binding takes effect.
Related commands: aaa nas-id profile.
Examples
# Bind NAS ID 222 with VLAN 2.
<Sysname> system-view
[Sysname] aaa nas-id profile aaa
[Sysname-nas-id-prof-aaa] nas-id 222 bind vlan 2

password

Syntax
password { cipher | simple } password
undo password
View
Local user view
Default Level
2: System level
Parameters
cipher: Specifies to display the password in cipher text.
simple: Specifies to display the password in simple text.
password: Password for the local user.
In simple text, it must be a string of 1 to 63 characters that contains no blank space, for example,
aabbcc.
1-27