Revision (Mstp) - Allied Telesis AR2050V Command Reference Manual

S T C
PANNING REE OMMANDS
(MSTP)
REVISION

revision (MSTP)

Overview Use this command to specify the MST revision number to be used in the
configuration identifier.
Use this command for MSTP only.
Syntax revision <revision-number>
Default The default of revision number is 0.
Mode MST Configuration
Usage The region name, the revision number, and the digest of the VLAN to MSTI
configuration table must be the same on all devices that are intended to be in the
same MST region.
Example awplus#
awplus(config)#
awplus(config-mst)#
Related region (MSTP)
Commands
show spanning-tree mst config
instance vlan (MSTP)
C613-50186-01 Rev B
Parameter
<revision-number>
configure terminal
spanning-tree mst configuration
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
<0-65535> Revision number.
revision 25
488