D-Link DXS-3600 Series Cli Reference Manual page 425

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
eth1/0/49 30.090
Channel 1
Channel 2
Channel 3
Channel 4
eth1/0/50 30.090
eth1/0/51 30.090
eth1/0/52 30.090
eth1/0/53 30.090
Switch#
This example shows how to display detailed transceiver monitoring information for all ports which are
valid for transceiver monitoring.
Switch# show interfaces transceiver detail
++ : high alarm, + : high warning, -
mA: milliamperes, mW: milliwatts
A: The threshold is administratively configured.
eth1/0/28
Transceiver Monitoring is enabled
Transceiver Monitoring shutdown action：Alarm
Current
Temperature(C) 30.090
Voltage (v) 3.353
Bias Current(mA) 16.794(++)
TX Power (mW) 0.258
(dbm) -5.900
RX Power (mW) 0.000(--)
(dbm) -(--)
eth1/1/1
Transceiver Monitoring is enabled
Transceiver Monitoring shutdown action: Alarm
Current
Temperature(C) 30.090
Voltage (v) 3.353
Bias Current(mA)
channel 1 16.794(++)
channel 2 16.794(++)
channel 3 16.794(++)
3.353
16.794(++)
16.794(++)
16.794(++)
16.794(++)
3.353 16.794(++)
3.353 16.794(++)
3.353 16.794(++)
3.353 16.794(++)
: low warning, -- : low alarm
High-Alarm High-Warning Low-Warning
75.000(A) 70.000
3.630 3.465
10.500 9.000
1.413 0.708
1.500 -1.500
1.585 0.794
2.000 -1.000
High-Alarm High-Warning Low-Warning
75.000(A) 70.000
3.630 3.465
10.500 9.000
420
-5.900 -(--)
0.000
-(--)
0.000
-(--)
0.000
-(--)
0.000
-(--)
0.000
-(--)
0.000
-(--)
0.000
-(--)
0.000
-(--)
Low-Alarm
0.000 -5.000
3.135 2.970
2.500 2.000
0.186 0.074
-7.300 -11.300
0.102 0.041
-9.900 -13.900
Low-Alarm
0.000
3.135
2.500
-5.000
2.970
2.000