8.8 Connector Conversion Adapter
GT10-9PT5S type connector conversion adapter enables an easy crossover wiring for the multi-drop-connected GOTs.
For the wiring between the connector conversion adapter and the controller, refer to the following manual.
GOT1000 Series Connection Manual (Mitsubishi Products) for GT Works3
8.8.1
Applicable connector conversion adapter
The following connector conversion adapter is applicable.
Model name
GT10-9PT5S
8.8.2
Installing procedure of connector conversion adapter
Description
For GOT multi-drop connection
1.
Turn the GOT power off.
2.
Connect the connection conversion adapter to the RS-
422/485 interface on the GOT.
3.
Fix the connection conversion adapter to the GOT
using the provided M3 tapping screws.
Tightening torque: 0.3 to 0.6 N•m
8.8 Connector Conversion Adapter
8 - 11
8. OPTION
1
2
3
4
5
6
7
8