Hitachi SH7751 Hardware Manual page 170

(3) H-UDI Reset


Source: SDIR.TI3–TI0 = B'0110 (negation) or B'0111 (assertion)


Transition address: H'A000 0000


Transition operations:
Exception code H'000 is set in EXPEVT, initialization of VBR and SR is performed, and a
branch is made to PC = H'A000 0000.
In the initialization processing, the VBR register is set to H'0000 0000, and in SR, the MD,
RB, and BL bits are set to 1, the FD bit is cleared to 0, and the interrupt mask bits (I3–I0) are
set to B'1111.
CPU and on-chip peripheral module initialization is performed. For details, see the register
descriptions in the relevant sections.
H-UDI_reset()
{
EXPEVT = H'00000000;
VBR = H'00000000;
SR.MD = 1;
SR.RB = 1;
SR.BL = 1;
SR.(I0-I3) = B'1111;
SR.FD = 0;
Initialize_CPU();
Initialize_Module(PowerOn);
PC = H'A0000000;
}
Rev. 3.0, 04/02, page 131 of 1064