Hitachi SH7751 Hardware Manual page 153

Superh risc engine
Table of Contents

Advertisement

The SQ transfer destination external address bit [28:0] specification is as shown below, according
to whether the MMU is on or off.

When MMU is on
The SQ area (H'E000 0000 to H'E3FF FFFF) is set in VPN of the UTLB, and the transfer
destination external address in PPN. The ASID, V, SZ, SH, PR, and D bits have the same
meaning as for normal address translation, but the C and WT bits have no meaning with regard
to this page. Since burst transfer is prohibited for PCMCIA areas, the SA and TC bits also have
no meaning.
When a prefetch instruction is issued for the SQ area, address translation is performed and
external address bits [28:10] are generated in accordance with the SZ bit specification. For
external address bits [9:5], the address prior to address translation is generated in the same way
as when the MMU is off. External address bits [4:0] are fixed at 0. Transfer from the SQs to
external is performed to this address.

When MMU is off
The SQ area (H'E000 0000 to H'E3FF FFFF) is specified as the address at which a PREF
instruction is issued. The meaning of address bits [31:0] is as follows:
[31:26]:
111000
[25:6]:
Address
[5]:
0/1
[4:2]:
Don't care
[1:0]
00
External address bits [28:26], which cannot be generated from the above address, are generated
from the QACR0/1 registers.
QACR0 [4:2]:
QACR1 [4:2]:
External address bits [4:0] are always fixed at 0 since burst transfer starts at a 32-byte
boundary.
In the SH7751 Series, data transfer to a PCMCIA interface area is always performed using the
SA and TC bits in the PTEA register.
Rev. 3.0, 04/02, page 114 of 1064
Store queue specification
External address bits [25:6]
0: SQ0 specification
1: SQ1 specification and external address bit [5]
No meaning in a prefetch
Fixed at 0
External address bits [28:26] corresponding to SQ0
External address bits [28:26] corresponding to SQ1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sh7751r

Table of Contents