Table of Contents
Advertisement
(2) Version 2.1 of the PCI specifications states that any combination of the byte-
enable signals (
[3:0]) is possible when accepting a configuration access. The
SH7751 specifications, however, define the values of
[3:0] as being ignored on
the acceptance of a configuration access and that access is in longword (DWORD)
units only.
*2 MPX is only supported by the SH7751R and is not supported by the SH7751.
Rev. 3.0, 04/02, page 802 of 1064
Advertisement
Table of Contents
