Remote Switch Update Configuration Example - Huawei Quidway S3900 Series Operation Manual

Operation Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510
Table 4-7 Display the operating status of the device management
Display the APP to be
adopted at reboot
Display the module type
and operating status of
each board
Display CPU usage of a
switch
Display
status of the fan
Display memory usage of
a switch
Display
status of the power supply
Display system diagnostic
information
system
information
suffixed with diag in the
Flash memory
Display
debugging on a specified
switch or all switches in
the fabric
Display
debugging on all switches
in the fabric in terms of
module names

4.4 Remote Switch Update Configuration Example

I. Network requirements
Telnet to the switch from a PC remotely and download applications from the FTP server
to the Flash memory of the switch to remotely update the switch software by using the
device management commands through CLI.
The switch acts as the FTP client, and the remote PC serves as both the configuration
PC and the FTP server.
Perform the following configuration on the FTP server.
Operation
display
[ unit unit-id ]
display
[ manuinfo [ unit unit-id ] |
unit unit-id ]
display cpu [ unit unit-id ]
the operating display fan [ unit unit-id
[ fan-id ] ]
display memory [ unit
unit-id | limit ]
the operating display power [ unit
unit-id [ power-id ] ]
or save
diagnostic
display
to a file diagnostic-information
display
enabled
{ fabric | unit unit-id }
[ interface interface-type
interface-number
module-name ]
enabled
display
fabric by-module
Huawei Technologies Proprietary
Command
boot-loader
device
debugging
|
debugging
4-4
Chapter 4 Device Management
Description
You can execute
display command in any
view.
the