Clearing The Statistics On Discarded Arp Packets; Debugging Arp Packets - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Run the following command in the user view to clear the statistics.
Procedure
l
----End

4.6.3 Clearing the Statistics on Discarded ARP Packets

Context
Statistics cannot be restored after being cleared. So, confirm the action before you run the
command.
To clear the statistics on discarded ARP packets, run the following commands in the user view.
Procedure
l
l
----End

4.6.4 Debugging ARP Packets

Context
Debugging affects the performance of the system. So, after debugging, run the undo debugging
all command to disable it immediately.
If a running fault occurs, run the following debugging commands in the user view to locate the
fault.
Procedure
l
Issue 01 (2009-07-28)
Run the reset arp packet statistics [ slot slot-id ] command to clear the statistics on ARP
packets.
CAUTION
Run the reset arp anti-attack statistics check user-bind { global | interface interface-
type interface-number } command to clear the statistics on the packets discarded because
they do not match the binding table.
Run the reset arp anti-attack statistics rate-limit command to clear the statistics on the
ARP packets discarded because the transmission rate exceeds the limit.
CAUTION
Run the debugging arp packet [ slot slot-id | interface interface-type interface-number ]
command to debug ARP packets.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 ARP Security Configuration
4-19