Debugging Arp Packet - Huawei Quidway S2000 Series Command Manual

Command Manual - Network Protocol
Quidway S2000 Series Ethernet Switches

1.1.3 debugging arp packet

Syntax
debugging arp packet
undo debugging arp packet
View
User view
Parameter
packet: ARP packet debugging.
Description
Using debugging arp command, you can enable ARP debugging. Using undo
debugging arp command, you can disable the corresponding ARP debugging.
By default, undo ARP debugging is enabled.
For the related command, see arp static, display arp.
Example
# Enable ARP packet debugging.
<Quidway> debugging arp packet
*0.771346-ARP-8-S1-arp_send:Send
sender_eth_addr :
00e0-fc00-3500,sender_ip_addr
0000-0000-0000
, target_ip_addr : 10.110.91.193
*0.771584-ARP-8-S1-arp_rcv:Receive
sender_eth_addr
: 0050-ba22-6fd7,
00e0-fc00-3
500, target_ip_addr : 10.110.91.159
an
: 10.110.91.159,
an
sender_ip_addr :
1-3
Chapter 1 ARP Configuration Commands
ARP Packet, operation
target_eth_addr
ARP Packet, operation
10.110.91.193, target_eth_addr
: 1,
:
: 2,
: