Vrrp Configuration; Configuring A Virtual Router Ip Address; Introduction To Vrrp Configuration Tasks - Huawei Quidway S3900 Series Operation Manual

Operation Manual – VRRP
Quidway S3900 Series Ethernet Switches-Release 1510
You can control the priority of the VRRP backup group according to the auto detect
result to enable automatic switch between the master switch and the standby switch as
follows:
Decrease the priority of a backup group when the result of the detecting group is
unreachable.
Restore the priority of a backup group when the result of the detecting group is
reachable.
Refer to Auto Detect Operation Manual for information about auto detect.

1.2 VRRP Configuration

1.2.1 Introduction to VRRP Configuration Tasks

Table 1-2 VRRP configuration tasks
Configure a virtual router IP
address
Configure
group-related parameters
VRRP backup group interface
tracking configuration
VRRP
configuration

1.2.2 Configuring a Virtual Router IP address

Table 1-3 lists the operations to configure a virtual router IP address (suppose you have
correctly configured the relation between the port and VLAN):
Table 1-3 Configure a virtual router IP address
Operation
Enter system view
Configure that the
virtual IP address
can be pinged
Map
router IP address
to a MAC address
Configuration
backup
auto detect
system-view
vrrp ping-enable
the virtual
vrrp method { real-mac |
virtual-mac }
Huawei Technologies Proprietary
Description
Section 1.2.2
Required
Virtual Router IP address"
Section 1.2.3
Required Backup
Parameters"
Section 1.2.4 "Configuring the
Optional
Port Tracking Function"
Section 1.2.5 "Configuring the
Optional
Auto Detect Function for VRRP"
Command
1-7
Chapter 1 VRRP Configuration
Related section
"Configuring a
"Configuring
Group-Related
Description
—
Optional
By default, the virtual IP
address cannot be pinged.
Optional
By default, the virtual IP
address of a backup group is
mapped to a virtual router IP
address.