Configuring Ip Source Trail Based On The Destination Ip Address; Checking The Configuration - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
No.
1
5.4.2 Configuring IP Source Trail Based on the Destination IP
Address
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip source-trail ip-address ip-address
IP source trail based on the destination IP address is configured.
----End

5.4.3 Checking the Configuration

Prerequisite
The configurations of IP source trail are complete.
Procedure
l
----End
Example
Run the display ip source-trail command, and you can view the statistics on IP source trail.
<Quidway> display ip source-trail ip-address 10.0.0.1
Destination Address: 10.0.0.1
Issue 06 (2010–01–08)
Run the display ip source-trail [ ip-address ip-address ] command to check the statistics
on IP source trail.
SrcAddr SrcIF
----------------------------------------------------------------------
198.19.1.8 GE2/0/1
198.19.1.11 GE2/0/1
198.19.1.7 GE2/0/1
198.19.1.5 GE2/0/1
198.19.1.9 GE2/0/1
198.19.1.3 GE2/0/1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Source IP Attack Defense Configuration
Data
Destination IP address of the attacked user
host
Bytes Pkts
5.151M 114.681K
4.825M 107.420K
4.433M 98.708K
2.868M 63.861K
2.215M 49.339K
1001.083K 21.762K
Bits/s Pkts/s
5.222M 14.534K
5.223M 14.535K
5.223M 14.537K
5.227M 14.546K
5.230M 14.553K
5.248M 14.605K
5-9