Creating A Domain - Huawei Quidway S9300 Configuration Manual

1 AAA and User Management Configuration
Applicable Environment
To perform authentication and authorization for a user logging in to the S9300, you need to
configure a domain.
Pre-configuration Tasks
Before configuring a domain, complete the following tasks:
l
l
l
l
Data Preparation
To configure a domain, you need the following data.
No.
1
2
3
4

1.7.2 Creating a Domain

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
domain domain-name
A domain is created and the domain view is displayed.
1-30
NOTE
The modification of a domain takes effect next time a user logs in.
Configuring authentication and authorization schemes
Configuring a RADIUS server template if RADIUS is used in an authentication scheme
Configuring an HWTACACS server template if HWTACACS is used in an authentication
or an authorization scheme
Configuring local user management in local authentication or authorization mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Data
Name of the domain
Names of authentication and authorization
schemes of the domain
(Optional) Name of the RADIUS server
template or the HWTACACS server template
of the domain
(Optional) Status of the domain
Issue 06 (2010–01–08)