Creating An Isp Domain; Configuring The Attributes Of An Isp Domain - Huawei Quidway S3100 Series Operation Manual

Operation Manual – AAA&RADIUS
Quidway S3100 Series Ethernet Switches

1.3.2 Creating an ISP Domain

Table 1-4 Create an ISP domain
Enter system view
Create an ISP domain and enter
its view, enter the view of an
existing
configure
domain

1.3.3 Configuring the Attributes of an ISP Domain

Table 1-5 Configure the attributes of an ISP domain
Enter system view
Create an ISP domain or
enter the view of an existing
ISP domain
Activate/deactivate the ISP
domain
Set the maximum number of
access users that can be
contained in the ISP domain
Set the user idle-cut function
Open/close
accounting-optional switch
Operation
ISP domain, or
the default ISP
Operation
the
Huawei Technologies Proprietary
Chapter 1 AAA&RADIUS Configuration
Command
system-view
domain { isp-name
default { disable | enable
isp-name } }
Command
system-view
domain isp-name
state { active | block }
access-limit { disable |
enable
max-user-number }
idle-cut { disable
enable minute flow }
accounting optional
1-10
Description
—
Required
|
The default ISP
domain
"system".
Description
—
Required
Optional
By default, once an ISP
domain is created, it is in
the active state and all
the users in this domain
are allowed to access
the network.
Optional
After an ISP domain is
created, the number of
access users it can
contain is unlimited by
default.
Optional
|
By default, user idle-cut
function is disabled.
Optional
By default, once an ISP
domain is created, the
accounting-optional
switch is closed.
is