Optional) Setting The Maximum Number Of Dynamic Ntp Sessions; Checking The Configuration - Huawei Quidway S5700 Series Configuration Manual - Network Management

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
Context
Do as follows on the switch that needs to be disabled from receiving NTP packets.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
A VLAN is created and the VLAN view is displayed.
Step 3 Run:
interface vlanif vlan-id
The interface that receives NTP packets is specified.
Step 4 Run:
ntp-service in-interface disable
The interface on the switch is disabled from receiving NTP packets.
----End
4.3.8 (Optional) Setting the Maximum Number of Dynamic NTP
Sessions
Context
Do as follows on the S5700 that functions as a client.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ntp-service max-dynamic-sessions number
The maximum number of dynamic NTP sessions is set.
----End

4.3.9 Checking the Configuration

After basic NTP functions are configured, you can view the configuration.
Prerequisite
The configurations of the Basic NTP Functions are complete.
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 NTP Configuration
220