Optional) Setting The Maximum Number Of Multicast Groups That Hosts Attached To An Interface Can Join - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Multicast
l
----End
1.3.6 (Optional) Setting the Maximum Number of Multicast Groups
that Hosts Attached to an Interface Can Join
Context
To limit the number of multicast programs available to users and multicast data traffic on an
interface, set the maximum number of multicast groups that users can join.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
The interface can be an Ethernet interface, a GE interface, or an Eth-Trunk interface.
Step 3 Run:
igmp-snooping group-limit group-limit vlan {vlan-id [ to vlan-id ] } &<1-10>
The maximum number of multicast groups that hosts attached to the interface can join.
Issue 01 (2011-07-15)
The VLAN view is displayed.
3. Run:
undo igmp-snooping router-learning
Dynamic learning of router interfaces is disabled in the VLAN.
By default, a router interface can be dynamically learned.
Disabling an interface from learning forwarding entries dynamically
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The interface view is displayed.
The interface can be an Ethernet interface, a GE interface, or an Eth-Trunk
interface.
3. Run:
undo igmp-snooping learning vlan { vlan-id1 [ to vlan-id2 ] } &<1–10>
The interface is disabled from dynamically learning forwarding entries.
By default, an interface is enabled to dynamically learn forwarding entries.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 IGMP Snooping Configuration
7