Idc Sensor Failure; Color Regist Test Pattern Failure; Color Regist Adjust Failure - Konica Minolta bizhub C35 Service Manual

DRAFT
13. PROCESS CAUTION INFROMATION
13.3.2

IDC sensor failure

IDC sensor (IDC)
Transfer belt unit
Step
1 Wipe clean the surface of the transfer belt with a soft cloth, if it is dirty.
2 Change the image transfer belt unit if the transfer belt is damaged.
3 Reinstall or reconnect IDC, sensor shutter or connector, if it is installed or connected improperly.
4 Clean IDC if it is dirty.
5 Check the HV connector for proper connection and correct as necessary.
6 Change IDC.
7 Change PRCB.
13.3.3

Color regist test pattern failure

Transfer belt unit
PH unit
Step
1 Wipe clean the surface of the transfer belt with a soft cloth, if it is dirty.
2 Change the image transfer belt unit if the transfer belt is damaged.
3 Change PH unit.
4 Change PRCB.
5 Change MFPB.
13.3.4

Color regist adjust failure

IDC sensor (IDC)
Step
1 Slide out the imaging unit and reinstall it in position.
2 Reinstall or reconnect IDC if it is installed or connected improperly.
3 Change IDC.
4 Change PRCB.
202
Field Service Ver. 1.0 Feb. 2010
Relevant parts
Printer control board (PRCB)
High voltage unit (HV)
Action
Relevant parts
Printer control board (PRCB)
MFP board (MFPB)
Action
Relevant parts
Printer control board (PRCB)
Action