Operation Precautions; Power Source; Operating Environment; Storage Of Copies - Konica Minolta bizhub C3851 Quick Start Manual

1.7

Operation precautions

1.7 Operation precautions
To ensure the optimum performance of this machine, observe the precautions described below.

Power source

The power source requirements are as follows.
- Use a power source with as little voltage or frequency fluctuations as possible.
Voltage fluctuation: Maximum + 6%/- 10% (at 110V to 127V AC), ^ 10% (at 220V to 240V AC)
-
- Frequency fluctuation: Maximum ^ 3 Hz (at 50 Hz/60 Hz)

Operating environment

The environmental requirements for correct operation of the machine are as follows.
-
Temperature: 50°F (10°C) to 86°F (30°C) with fluctuations of no more than 18°F (10°C) within an hour
-
Humidity: 15% to 85% with fluctuations of no more than 10% within an hour

Storage of copies

To store copies, follow the recommendation listed below.
-
Copies that are to be kept for a long time should be kept where they are not exposed to light in order
to prevent them from fading.
- Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies.
- Color copies have a thicker layer of toner than normal black-and-white copies. Therefore, when a color
copy is folded, the toner at the fold may peel off.

Data stored in this machine

For the machine with hard disk, it is suggested to delete all data stored in all hard disk areas using the over-
write all data function to prevent leakage of data prior to transfer or disposal of the machine, or returning of
the leased machine.
For details of the overwrite all data function, refer to the User's Guide. Contact your service representative
before deleting data.
It is recommended to backup HDD periodically as the measures for HDD defect. For the detail information of
HDD backup, contact your service representative.

Precautions for Carrying the Machine

This machine weighs approximately 117 lb (53.1 kg) (bizhub C3851FS)/108 lb (49.2 kg) (bizhub
C3851/C3351), including consumables. Two people are always required to lift the machine.
bizhub C3851FS/C3851/C3351
1
1-21