Img Adj Thick; Img Adj Black; Image Adj Param - Konica Minolta bizhub C35P Service Manual

10. SERVICE MODE
10.5.6

IMG ADJ THICK

A. Use
• To fine-adjust density of printed images of each color for thick paper.
• To change the density of the printed image for each color with thick paper.
B. Procedure
• The default setting is 0.
1. Call [SERVICE MENU] to the display.
2. Select [ALIGNMENT] → [IMG ADJ THICK] and press the Menu/Select key.
3. Select desired color with the up key /down key
4. Select desired setting value with the up key /down key
key.
<Adjustment instructions>
Light color: increase the setting value
Dark color: decrease the setting value
10.5.7

IMG ADJ BLACK

A. Use
• To fine-adjust the density of the printed image for a black printing.
• To vary the density of the printed image of a black printing.
B. Procedure
• The default setting is 0.
1. Call [SERVICE MENU] to the display.
2. Select [ALIGNMENT] → [IMG ADJ BLACK] and press the Menu/Select key.
3. Select desired setting value with the up key /down key
key.
<Adjustment instructions>
If the black is light, increase the setting value.
If the black is dark, decrease the setting value.
10.5.8

IMAGE ADJ PARAM

A. Use
• Adjusts the printer in case of an image quality problem (uneven density)
• To correct image quality problems (uneven density) due to the machine being operated
at a high altitude.
B. Procedure
• The default setting is 0.
NOTE
• When the setting has been changed, be sure to run a [QUALITY MENU] → [CALI-
BRATION] → [AIDC process].
106
Field Service Ver. 1.0 May 2010
-5 to +5
and press the Menu/Select key.
and press the Menu/Select
-2 to +2
and press the Menu/Select
0 to 6