User Settings; Displaying The User Settings Screen; Custom Display Settings - Scan/Fax Settings - Konica Minolta bizhub C360 User Manual

9.3

User Settings

9.3 User Settings
9.3.1

Displaying the User Settings screen

To display the User Settings screen, press the Utility/Counter key on the control panel, and then select [User
Settings] from the Utility menu that appears.
Reference
-
9.3.2

Custom Display Settings - Scan/Fax Settings

Customize the Fax/Scan mode screen.
Configure the default tab of Fax/Scan mode screen the (Default: Address Book).
1/2 page
Item
[Default Tab]
[Program Default]
[Address Book Index De-
fault]
[Shortcut Key 1]/[Short-
cut Key 2]
bizhub C360/C280/C220
Downloaded From ManualsPrinter.com Manuals
An item can also be selected by pressing the key on the keypad for the correspondent number. To se-
lect [User Settings], press 2 on the keypad.
Description
Configure the default tab of Fax/Scan mode screen the (Default: Address
Book).
Configure the default Scan/Fax program screen (Default: PAGE1).
Select a index type that appears in the [Address Book] tab (Default: Fa-
vorites).
Allows you to register up to two shortcut keys for scan, original, or commu-
nication settings at the bottom of the screen.
•
•
•
Two shortcut keys can be registered. If an optional Image Controller IC-
412 v1.1 is installed, only one shortcut key can be registered.
To delete the shortcut key, press [OFF].
If Shortcut Keys 1 and 2 are configured, [Language Selection] is not dis-
played on the Scan/Fax screen.
9
9-24