Field Service Ver. 1.0 Jul. 2006
5.3.32
Registration roller solenoid (SD2)
[1]
[2]
[2]
1. Remove the power supply cooling
fan motor.
See P.57
2. Remove the tab [1] and the guide [2].
4139F2C581DA
3. Disconnect the connector [1] and
remove the screw [2]. Then, remove
the registration roller solenoid [3].
[3]
[1]
4139F2C582DA
Precaution for reinstallation
• Reinstall the solenoid so that the
clearance between the gear of the
registration roller clutch and flap-
per falls within the specified range.
Specifications: 1.0 ± 0.2 mm
4139fs2067c1
5. Other
67