Toner Supply Clutch/Y (Cl4) / Toner Supply Clutch/M (Cl5) Toner Supply Clutch/C (Cl6) / Toner Supply Clutch/K (Cl7 - Konica Minolta BIZHUB C3100P Service Manual

[4] [3]
[1] [2]
21. To reinstall, reverse the order of removal.
5.25 Toner supply clutch/Y (CL4) / Toner supply clutch/M (CL5) Toner supply clutch/C (CL6) / Toner supply
clutch/K (CL7)
1. Remove the toner cartridge (C,M,Y,K).
F.5.1.1 Replacing the toner cartridge (C, M, Y, K)
2. Remove the waste toner bottle.
F.5.2.1 Replacing the waste toner bottle
3. Remove the imaging unit (C,M,Y,K).
F.5.1.2 Replacing the imaging unit (C, M, Y, K)
4. Remove the fuser unit.
F.5.3.1 Replacing the fuser unit
5. Remove the exit cover.
G.5.4 Exit cover
6. Remove the left cover.
G.5.2 Left cover
7. Remove the rear cover.
G.5.1 Rear cover
8. Remove the operation panel.
G.5.6 Operation panel
9. Remove the upper cover1/ upper cover2.
G.5.7 Upper cover1/ Upper cover2
10. Remove the cooling fan motor.
G.5.22 Cooling fan motor (FM11)
[2]
[1]
[3]
[1]
[1]
[3]
G DISASSEMBLING/REASSEMBLING > 5. Disassembly/reassembly
18. Disconnect the connector [1].
19. Remove the E-ring [2].
20. Remove the bushing [3], and remove the registration clutch [4].
11. Remove the screw [1], and remove the exit drive assy [2].
12. Disconnect two connectors [3].
13. Remove the harness from seven wire saddles [1].
G-24
procedure (b...