Field Service Ver. 3.0 Jan. 2008
6.3.71
Transfer belt retraction clutch (CL7)
1. Remove the fusing drive unit.
See P.119
[1]
6.3.72
Developing clutch/K (CL5)
1. Remove the high voltage unit.
See P.142
[1]
[2]
[4]
[3]
A02EF2C195DA
[1]
A02EF2C196DA
[2]
A02EF2C197DA
2. Disconnect the connector [2],
remove three E-rings [1] and five
screws [3], and remove the metal
plate [4].
3. Remove the transfer belt retraction
clutch [1].
2. Remove two screws [1], and remove
the rear handle cover [2].
6. Other
165