Lamp Indications
The contents of lamp indications on this circuit card are shown in the table below.
LAMP NAME
COLOR
+80V ON
Green
–48 V ON
Green
RGU ON
Green
DC ON
Green
OPE
Green
CPUALM
Red
DCALM
Red
RGUALM
Red
HOWALM
Red
PA-PW55-B (PWR) Lamp Indications Reference
Remains lit while +80 V input power is being supplied.
Remains lit while –48 V input power is being supplied.
Remains lit while RGU output is in progress.
Remains lit while +5 V, +12 V, and –5 V are being output normally.
Lights when information exchange with the CPU is possible.
Lights when reset of the microprocessor has been activated.
Lights in the case of +5 V, +12 V, or –5 V outputs alarm.
Lights in the case of RGU voltage alarm.
Lights in the case of howler alarm.
VOL.3-344
CHAPTER 2
TERMINAL-RELATED DEVICES
STATE