NEC Univerge sv8500 Manual page 3244

E
STEP 20: The LCD returns to [Spare IP Settings] menu. Press the software key for "Exit."
[Spare IP Settings]
1.Spare/Backup IP Mode
2.Network Settings
3.SIP Settings
STEP 21: The LCD returns to [Advanced Settings] menu. Press the software key for "Exit."
[Advanced Settings]
1.LAN Port Settings
2.PC Port Settings
3.CDP Mode
STEP 23: The LCD returns to [Network Settings] menu. Press the software key for "Exit".
[Network Settings]
1.IP Address
2.Default Gateway
3.Subnet Mask
STEP 24: The LCD returns to [Config] menu. Press the software key for "Save" to save settings.
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
Cancel Save
END
Exit
Exit
Exit
VOL.3-757
CHAPTER 4 CONFIGURATION SETUP