NEC Univerge sv8500 Manual page 3299

0. Config
(Continued) (Earlier than FW 2.0.0.0)
Parameter
2. SIP Settings
1. SIP User
1. User ID
2. Password
3. Extension Number
4. Backup Logon
2. Server Address
1. 1st Server Address
2. 2nd Server Address
3. 3rd Server Address
4. 4th Server Address
5. Registrar Destination
1. 1st Register Address
2. 2nd Register Address
3. 3rd Register Address
4. 4th Register Address
3. Access Mode
1. Normal
2. Remote
4. SIP Server Port
1. 1st Server Port
2. 2nd Server Port
3. 3rd Server Port
4. 4th Server Port
5. Registrar Destination
1. 1st Register Port
2. 2nd Register Port
3. 3rd Register Port
4. 4th Register Port
Description
Sets SIP related data.
Sets user data.
Sets user ID for digest authentication.
Sets password for digest authentication.
Not used.
Not used.
Sets IP address or URI of SIP server. Note 1
Sets IP address or fully qualified domain name
(FQDN) of 1st ~ 4th SIP server. Note 1
Sets IP address or fully qualified domain name
(FQDN) of registrar destination.
Sets IP address or fully qualified domain name
(FQDN) or 1st ~ 4th registrar server.
Sets access mode for SIP server.
Normal access
Remote access
Sets SIP server port [1024-65535].
Specifies the destination port number of
sending packet to 1st ~ 4th SIP server.
Sets port for registrar server [1024-65535]
Sets port for 1st ~ 4th registrar server.
VOL.3-812
CHAPTER 4 CONFIGURATION SETUP
DT750
Default
Series
- X
- X
- X
- X
- -
- -
- X
- X
- X
- X
Normal X
5060 X
DT730 DT710
Series Series
X X
X X
X X
X X
- -
- -
X X
X X
X X
X X
X X
X X