NEC Univerge sv8500 Manual page 2517

STEP 4: Select the desired name to which you would like to initiate a call.
The ADM will default back to the DSS screen when the ADM unit is idle for 20 seconds (no operation
Note:
from user).
The "DIR/Exit" key will default the ADM back to the DSS screen from any menu.
Note:
Making a call from "Dialed #" History
STEP 1: Press "DIR/Exit" to enter the Phonebook Directory.
STEP 2: Selecting the "Dialed #" will show the history of the last 16 dialed calls.
STEP 3: Select the Dialed History entry that you want to make call.
Deleting a Dialed Number Entry
STEP 1: From the Dial History Menu select the Delete Button
STEP 2: Select the entry that you wish to delete.
STEP 3: Press "ALL?" button (All Clear) or Name side button (One Entry Clear), if you want to delete all en-
tries.
Select OK at the confirmation message.
VOL.3-30
CHAPTER 1 TERMINALS