STEP 2: Advanced Settings Menu appears. Select "5. 802.1X Settings" by pressing "5" key on the Advanced
Settings Menu.
STEP 3: 802.1X Settings Menu appears.
Select "1. Supplicant Mode" by pressing "1" key to enable or disable the Supplicant Mode.
Select "3. Account (MD5)" by pressing "3" key to set User ID used for EAP-MD5.
Select "4. Password (MD5)" by pressing "4" key to set password used for EAP-MD5.
Select "5. EAPOL VLAN Mode" by pressing "5" key to enable EAPOL VLAN Mode.
"2. EAP Method" and "6. Certificate Delete" are not supported by DtermIP (SIP) with Firmware Version
Note:
4.1.x.x.
Network Settings Menu
11.DHCP Mode
2.IP Address
3.Default Gateway
4.Subnetmask
5.DNS Address
6.Advanced Settings
Up
Down
Exit
Advanced Settings Menu
161.LAN Port Settings
2.PC Port Settings
3.CDP Mode
4.Type of Service
5.802.1X Settings
Up
Down
Exit
802.1X Settings Menu
1651.Supplicant Mode
2.EAP Method
3.Account(MD5)
4.Password(MD5)
5.EAPOL VLAN Mode
6.Certificate Delete
Exit
VOL.3-545
CHAPTER 4
CONFIGURATION SETUP