NEC Univerge sv8500 Manual page 2947

STEP 4: The display changes as follows. Choose either "0. Automatic", "1. ON" or "2.OFF" by pressing each
digit key. Then press the OK key.
0. Automatic: Follow the setting on the System. If no setting is made in the System, the default
1. ON:
2. OFF
STEP 5: Go back to the Administrator Menu (Page 1) by pressing "0" key on the Page 2. Then, go back to the
User Menu by pressing the Exit key. On the User Menu, press the Save key to save the setting data.
[Administrator Menu (Page2)]
5.RTP Alarm
0.Next Page (P2>>P1)
Up Down
Press "0" key.
0.Automatic
1.ON
Up Down Cancel
setting (DTMF=OFF/RTP Alarm=ON) is applied.
Follow the setting on the terminal (ON).
Follow the setting on the terminal (OFF).
[Administrator Menu (Page1)]
1.DtermIP Mode
2.Download Address
Up Down
Press "Exit" key.
VOL.3-460
CHAPTER 4 CONFIGURATION SETUP
OK
[User Menu]
1.DHCP Mode
2.DRS Address Primary
Up Down Cancel
Exit
Press "Save" key.
Save