NEC Univerge sv8500 Manual page 3263

[1] Network Settings
STEP 1: When "1. Network Settings" is selected, the LCD displays the following "DHCP Mode."
DHCP Mode
Up Down Prev
STEP 2: Switch the page to display other parameters by pressing the software key for "Up" and "Down."
• DHCP Mode - - - - - - - - - - -Whether to use DHCP
IP Address- - - - - - - - - - - - -IP address of terminal Note 1
•
• Default Gateway - - - - - - - -IP address of default gateway
• Subnet Mask - - - - - - - - - - -Subnet mask Note 1
• DNS Address - - - - - - - - - - -IP address of DNS server
• VLAN Mode - - - - - - - - - - -Whether to use VLAN on terminal
• VLAN ID - - - - - - - - - - - - -VLAN ID on terminal
• VLAN Priority - - - - - - - - - -VLAN Priority on terminal
• Speed & Duplex - - - - - - - - -Communication speed of LAN port (10M, 100M, Full/Half-Duplex, Auto
• PC Port VLAN Mode - - - - -Whether to use VLAN of PC port
• PC Port VLAN ID - - - - - - -VLAN ID of PC port
• PC Port VLAN Priority - - - -VLAN Priority of PC port
• PC Port Speed & Duplex - - -Communication speed of PC port (10M, 100M, Full/Half-Duplex, Auto
• PC Port Available - - - - - - - -Whether to use PC port Note 2
• EAPOL Forwarding - - - - - -Whether to forward EAPOL from PC port
CDP Mode - - - - - - - - - - - -Whether to inform power consumption information by CDP Note 3
•
• ToS (RTP) - - - - - - - - - - - - -ToS setting for RTP packet
• ToS (SIP) - - - - - - - - - - - - -ToS setting for SIP packet
• Supplicant Mode - - - - - - - -Whether to use Supplicant function
• EAP Method - - - - - - - - - - -802.1X authentication method (EAP-MD5)
• EAP VLAN - - - - - - - - - - - -Whether to add VLAN tag to EAP packet
• Account (MD5) - - - - - - - - -User ID for MD5 authentication
• 802.1X Status - - - - - - - - - -MD5 authentication status
• SIP Self Port - - - - - - - - - - -SIP port number for DT700 Series
• RTP Self Port- - - - - - - - - - -RTP port number for DT700 Series
*See Parameters in Network Settings for the page switching order by Up and Down key.
STEP 3: Pressing the software key "Prev" returns the LCD to System Information menu.
1.Network Settings
2.SIP Settings
3.Audio&Visual Settings
Up Down Prev
Enable
negotiation)
negotiation)
Exit
VOL.3-776
CHAPTER 4 CONFIGURATION SETUP