NEC Univerge sv8500 Manual page 3001

(c) When configuration data assignment is completed, proceed to UPDATING CONFIGURATION
DATA. When the other item is also specified, return to SELECTION OF CONFIGURATION ITEM.
13. RINGER VOLUME IN PB
This item specifies the ringer volume in the position busy state.
(a) Press the desired number. An asterisk (*) shows the selected number.
1. The ringer volume is the same level in the operating state.
2. The ringer volume is set to the minimum level.
SRC Return to the Configuration Menu
Default setting is "1: NORMAL".
Note 1:
(b) Press the SRC key. The display returns to Configuration Menu.
(c) When configuration data assignment is completed, proceed to UPDATING CONFIGURATION
DATA. When the other item is also specified, return to SELECTION OF CONFIGURATION ITEM.
[RINGER VOLUME IN PB]
*1: NORMAL
Note 1
2: MINIMUM
[CONFIG MENU P5] VER x
1: FUNCTION KEY SWAP
2: RINGER VOLUME IN PB
3: POWER CONTROL
CHAPTER 4
SRC: menu
SRC: prev page
DEST: next page
Release: exit
Answer: update
VOL.3-514
CONFIGURATION SETUP