NEC Univerge sv8500 Manual page 3031

To delete an entered character, press BK key.
Note:
STEP 5: Press OK key and go back to the display of Step 3. Repeat Step 3-4 until all the necessary data is set.
STEP 6: When the all necessary data is set, press Exit key and go back to the Advanced Settings Menu.
STEP 7: Press Exit key on the Advanced Settings Menu to return to the Network Settings Menu.
STEP 8: Press Exit key on the Network Settings Menu and go back to the Main Menu.
STEP 9: Press Save key on the Main Menu to save the assigned data.
4.1.6.10 802.1X Settings
On the 802.1X Settings parameter, set the data related to 802.1X authentication.
This parameter is available for DtermIP (SIP) with Firmware Version 4.1.x.x or later.
Note:
STEP 1: Select "6. Advanced Settings" by pressing "6" key on the Network Settings Menu.
Key Entry Method
The Number of Times Key is Pressed
Digit
Key
1 2
1 1
2 2 A
3 3 D
4 4
5 5
6 6
7 7
8 8
9 9
0 0
ToS?(hex)
Cancel
BK
VOL.3-544
CHAPTER 4 CONFIGURATION SETUP
3 4
B C
E F
0xXX
OK