NEC Univerge sv8500 Manual page 3198

STEP 5: LCD displays the [RTP Alarm] menu. Select either Automatic, Disable or Enable using digit keys.
"0. Automatic" will be flashing before any selection is made, since "0" is assigned by default.
Press the software key for "OK" when done.
[RTP Alarm]
0.Automatic
1.Disable
2.Enable
Back
LCD Display
0. Automatic
1. Disable
2. Enable
STEP 6: LCD returns to [Talk] menu. Pressing the software key for "Back" will return to uppder menu.
[Talk]
1.RTP Alarm
2.DTMF Tone
3.Key Touch Tone
Back
END
OK
- Follows the setting assigned to system.
- Settings assigned to system has priority.
- RTP Alarm is Enabled only when settings assigned by system do not exist.
- Does not follow the setting assigned by system.
- Settings assigned to terminal has priority.
- RTP Alarm is Disabled.
- Does not follow the setting assigned by system.
- Settings assigned to terminal has priority.
- RTP Alarm is Enabled.
OK
VOL.3-711
CHAPTER 4
Assignment
Conditions
CONFIGURATION SETUP