NEC Univerge sv8500 Manual page 3211

B
STEP 8: On [Encryption] menu, press the software key for "Exit." The LCD displays [SIP Settings]
menu.
[SIP Settings]
1.SIP User
2.Server Address & URI
3.Access Mode
STEP 9: On [SIP Settings] menu, press the software key for "Exit." The LCD displays [Config] menu.
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
STEP 10:On [Config] screen, press the software key "Save" to save the settings.
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
END
[2] Configuration Setting by Web Programming
STEP 1: Select [SIP Settings]
STEP 2: Select the [Enable] parameter, and click the "OK" button.
STEP 3: Select [SIP Settings]
STEP 4: Enter the One Time Password [up to 10 digits ("0-9", "*", "#")].
On the screen, the password will be displayed with "*".
Note:
Enter the same One Time Password as the password assigned to the Telephony Server.
Note:
STEP 5: Click the "Save" button.
Exit
Cancel Save
Cancel Save
→ →
[Encryption]
→ →
[Encryption]
VOL.3-724
CHAPTER 4
[Authentication Mode].
[One Time Password].
CONFIGURATION SETUP