NEC Univerge sv8500 Manual page 2955

A
STEP 5: Press TFTP key (the leftmost soft key) for TFTP, or FTP key (the rightmost soft key) for FTP.
While download is in progress, "Downloading..." is displayed.
File:
TFTP
Note: In this example, press FTP key for FTP.
Caution: Do Not Trun OFF the power of the IP Enabled Dterm while "Downloading..." is displayed. If the
power is turned OFF, there is a possibility that the IP Enabled Dterm cannot start up normally.
STEP 6: After a while, the display will change as follows indicating the download is completed.
"Download Complete" is displayed when the download is complete.
STEP 7: Press Exit key to reset the IP Enabled Dterm. The terminal starts up again with the new program.
B
Note
xxxxxxxxxxx. hex
Cancel FTP
Downloading...
Download Complete
Downloading...
Download Complete
VOL.3-468
CHAPTER 4
Downloading...
Exit
Exit
CONFIGURATION SETUP