NEC Univerge sv8500 Manual page 3170

[2] Configuration Setting by Web Programming
STEP 1: Select [Maintenance]
STEP 2: Enter Handset Send Volume using number buttons 0-31.
STEP 3: Click the "OK" button.
STEP 4: Click the "Save" button.
For details on Handset Send Gain Value, see [1] Configuration Setting on Terminal–STEP 5.
Note 1:
6.2.10 Handset Receive Bias
User can assign Handset Receive Volume on DT700 Series terminal.
[1] Configuration Setting on Terminal
STEP 1: On [Config] main menu, select "3. Maintenance Settings."
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
STEP 2: On [Maintenance] menu, select "4. Adjust" to display the [Adjust] menu.
[Maintenance]
1.Download Menu
2.Hard Reset
3.Data Clear
STEP 3: On [Adjust] menu, select "1. Audio."
[Adjust]
1.Audio
2.Key Kit Type
3.Calibration
STEP 4: On [Audio] menu, select "3. Receive Bias."
[Audio]
1.Sidetone Volume
2.Send Gain
3.Receive Bias
A
→ [Adjust] →
Note: For other operations, " ↑" and " ↓" of software key,
Cancel Save
Exit
Exit
Exit
CHAPTER 4
[Audio] → [Send Gain].
Note 1
cursor key, and touch-sensitive panel operation are
also available. Refer to Section 6.1.1.2 Operations for
more details.
VOL.3-683
CONFIGURATION SETUP