NEC Univerge sv8500 Manual page 3021

4.1.3 Default Gateway
On the Default Gateway parameter, set IP address of the default router.
STEP 1: Select "3. Default Gateway" by pressing "3" key on the Network Settings Menu.
STEP 2: Enter the default gateway IP address. For example, to set the IP address of 10.41.208.205, enter
10*41*208*205 [separate with an asterisk (*)].
To delete an entered character, press BK key.
Note:
STEP 3: After entering IP address, press OK key and go back to the Network Settings Menu.
STEP 4: Press Exit key on the Network Settings Menu to return to the Main Menu.
STEP 5: Press Save key on the Main Menu to save the assigned data.
Network Settings Menu
11.DHCP Mode
2.IP Address
3.Default Gateway
4.Subnetmask
5.DNS Address
6.Advanced Settings
Up Down Exit
Gateway? XXX.XXX.XXX.XXX
' '
Use * For .
Cancel
BK
VOL.3-534
CHAPTER 4 CONFIGURATION SETUP
OK