NEC Univerge sv8500 Manual page 3145

C
STEP 15: The LCD displays [Network Settings] menu. Select "4. Subnet Mask."
[Network Settings]
1.DHCP Mode
2.IP Address
3.Default Gateway
STEP 16: The LCD displays [Subnet Mask] setting screen. Assign subnet mask using digit keys.
[Subnet Mask]
*'For'.'
0. 0.
BK
STEP 17: The LCD displays [Network Settings] menu.
[Network Settings]
1.DHCP Mode
2.IP Address
3.Default Gateway
IP address
or
FQDN
IP address
to specify
SIP
When IP address is used to specify SIP server:
server?
On [Network Settings] menu, press the software key for "Exit" to return to
[Config] menu.
FQDN
When FQDN is used to specify SIP server:
Assign DNS Server's IP address on DT700 Series [Config] setting.
STEP 18: On [Network Settings] menu, select "5. DNS Address."
[Network Settings]
1.DHCP Mode
2.IP Address
3.Default Gateway
D
Exit
0. 0
Use "*" to separate each bytes.
Cancel OK
Press the software key for "OK" when all settings are complete.
Exit
Go to STEP 22
Exit
Down
VOL.3-658
CHAPTER 4
Network Settngs Menu List
1. DHCP Mode
Up
2. IP Address
3. Default Gateway
4. Subnet Mask
5. DNS Address
6. Advanced Settings
Down
Network Settngs Menu List
1. DHCP Mode
2. IP Address
Up
3. Default Gateway
4. Subnet Mask
5. DNS Address
6. Advanced Settings
CONFIGURATION SETUP
Go to STEP 18