NEC Univerge sv8500 Manual page 3162

STEP 1: On [Config] menu, select "2. SIP Settings."
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
Cancel Save
STEP 2: The LCD displays [SIP Settings] menu. Select "5. Area ID."
[SIP Settings]
1.SIP User
2.Server Address
3.Access Mode
STEP 3: The LCD displays [Area ID] menu.
[Area ID]
0.Automatic
1.Japan
2.America
Cancel
Example
[Area ID] [01]
0.Automatic
1.Japan
2.America
Cancel
STEP 4: The LCD returns to [SIP Settings] menu. Press the software key for "Exit" to return to
[Config] menu.
[SIP Settings]
1.SIP User
2.Server Address
3.Access Mode
STEP 5: On [Config] screen, press the software key "Save" to save the settings.
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
Cancel Save
END
Note: For other operations, " ↑" and " ↓" of software key,
cursor key, and touch-sensitive panel operation are
also available. Refer to Section 6.1.1.2 Operations for
more details.
Up
Exit
Down
Enter Area ID using the digit keys.
-Use digit keys 0-9.
-LCD will display entering field upper right of the LCD.
OK
-Enter 2-digit values.
When selecting [1. Japan]:
1) Enter "0" and "1."
2) Entering Field displays "01."
3) "1. Japan" display flashes.
OK
4) Press software key for "OK."
Exit
VOL.3-675
CHAPTER 4 CONFIGURATION SETUP
SIP Settngs Menu List
1. SIP User
2. Server Addresss & URI
3. Access Mode
4. SIP Server Port
5. Area ID
6. Extra Function