NEC Univerge sv8500 Manual page 2942

STEP 10: Select "1. Echo Request Start" by pressing "1" on Ping Menu. The following display appears and the
terminal starts to send Ping.
STEP 11: When the sending of Ping is completed or "STOP" Key is pressed, the sending report will be displayed
as follows.
MAX
0000ms
Up Down
STEP 12: Go back to Ping Menu by pressing Exit Key.
Echo Request Start!
Min Ave
0000ms
0000ms
After a second
Exit
VOL.3-455
CHAPTER 4 CONFIGURATION SETUP
Echo Request Start!!
0.XXX.XXX.XXX.XXX.XXXXms
1.XXX.XXX.XXX.XXX.XXXXms
2.Request timed out.
3.XXX.XXX.XXX.XXX.XXXXms
STOP
4.XXX.XXX.XXX.XXX.XXXXms
5.XXX.XXX.XXX.XXX.XXXXms
6.XXX.XXX.XXX.XXX.XXXXms
Sent
Received Lost
0000: 0000
0000:
Up Down
Exit