NEC Univerge sv8500 Manual page 2930

A
STEP 5: After one of the ToS values is selected, the display changes as follows. Enter the desired ToS value in
hexadecimal, by using "0~9" and "#" keys.
When the appropriate number or alphanumeric character appears, press the "#" key.
A~F can be entered by means of "2" or "3" key.
"2" Key: 2
"3" Key: 3
Example: When entering "0B"...
[Press "0" key (+ "#" Key)]
Tos(hex)
0x 0
BK
Cancel OK
STEP 6: After the desired ToS value is entered, press the OK key to go back to the display of Step 4. If more than
one ToS value needs to be set, repeat Steps 4 and 5.
STEP 7: Press the Exit key to return to the Administrator Menu.
STEP 8: The Administrator Menu is displayed again.
Return to the User Menu by pressing Exit key.
B
ToS(hex) 0x _
BK
Cancel OK
A B C (back to 2)
D E F (back to 3)
[Press "2" key]
Tos(hex)
0x 02
BK
Cancel OK
ToS(hex) 0x 0B
BK
Cancel OK
1. DRS
2. Protims
Up Down
[Administrator Menu]
1. Dterm IP Mode
2. Download Address
Up Down
VOL.3-443
CHAPTER 4 CONFIGURATION SETUP
[Press "2" key]
[Press "2" key]
Tos(hex) Tos(hex)
0x 0A
BK BK
Cancel OK
Exit
Exit
0x 0B
Cancel OK