NEC Univerge sv8500 Manual page 3000

12. FUNCTION KEY SWAP
This item specifies the locations of function keys.
(a) Press the desired number. An asterisk (*) shows the selected number.
1. Original setting
2. Swapped setting
The location of each key changes as shown below.
Note:
SRC Return to the Configuration Menu
Default setting is "1: ORIGINAL".
Note 1:
(b) Press the SRC key. The display returns to Configuration Menu.
[FUNCTION KEY SWAP]
*1: ORIGINAL
Note 1
2: SWAPPED
ORIGINAL SETTING
Alarm PositionAvailable
TIE Busy
LDN ATND
EMG BV TRKSL Call Park
SWAPPED SETTING
Alarm PositionAvailable
(FX) TIE Busy
LDN
EMG BV TRKSL Call Park
[CONFIG MENU P5] VER x
1: FUNCTION KEY SWAP
2: RINGER VOLUME IN PB
3: POWER CONTROL
CHAPTER 4
SRC: menu
Position Busy Night
NANS Recall (TF) (FX)
SC SVC
Position Busy
Recall (TF)
ATND NANS
SC SVC
SRC: prev page
DEST: next page
Release: exit
Answer: update
VOL.3-513
CONFIGURATION SETUP
PAGE
REC
Start Mute
Night
PAGE
REC
Start Mute