NEC Univerge sv8500 Manual page 3191

(b) Admin Password
STEP 1: On [Config] menu, select "4. Security."
[Config]
2.SIP Settings
3.Maintenance Settings
4.Security
Cancel Save
STEP 2: The LCD displays [Security] menu. Select "3. Admin Password."
[Security]
1.Web Programming
2.Push Server
3.Admin Password
STEP 3: On [Admin Password] menu, enter "Old Pass" and "New Pass." Then, press the software key for OK.
[Admin Password]
Old Pass:XXXX
New Pass: ****
Retry Pass: ****
BK Set Cancel OK
A
Up
Down
Exit
VOL.3-704
CHAPTER 4
Config Menu List
1. Network Settings
2. SIP Settings
3. Maintenance Settings
4. Security
5. Terminal Information
6. Application Settings
#. Special
CONFIGURATION SETUP
Note: For other operations, "↑"
and "↓" of software key,
cursor key, and touch-
sensitive panel operation are
also available. Refer to
Section 6.1.1.2 Operations
for more details.