NEC Univerge sv8500 Manual page 3105

Hide thumbs Also See for Univerge sv8500:

Table of Contents

6. DT700 Series

This section explains the configuration setup for DT700 Series. The following types of configuration setting are

provided for DT700 Series:

[1] Configuration Setup on Terminal

Configuration data can be assigned by terminal operation. Each terminal can assign various configuration

data by key operation. Press the "Menu" button and start up the configuration menu on the LCD. For de-

tails, see Section 6.2 Configuration Data Setting Procedure.

Configuration setup is not supported on terminals without LCD.

[2] Configuration Setup by Web Programming

By using Web Programming application, various settings for the terminal is possible from the maintenance

console. Web Programming supports both types of terminal; with LCD and without LCD. For details, see

Section 6.2 Configuration Data Setting Procedure.

* This section describes the configuration settings related to the Telephony Server.

* For some menus and parameters, this section describes "Not used" on the example LCD and the configuration

menu list table to show they cannot be used. (These menus and parameters are displayed on the LCD of DT700

Series though, they cannot be used in this version.)

CONFIGURATION SETUP

Show Quick Links

Table of Contents