NEC Univerge sv8500 Manual page 3157

A
STEP 6: The LCD displays [Password] screen.
[Password]
xxxxxxxxxxxxxxxxx
BK Cancel OK
STEP 7: The LCD returns to [SIP User] menu. Press the software key for "Exit."
[SIP User]
1.User ID
2.Password
3.Incom Number
STEP 8: The LCD returns to [SIP Settings] menu. Press the software key for "Exit" to return to
[Config] menu.
[SIP Settings]
1.SIP User
2.Server Address
3.Access Mode
STEP 9: On [Config] screen, press the software key "Save" to save the settings.
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
Cancel Save
END
Enter Password for the User ID using the digit keys.
-Use digit keys 0-9, * and #.
-Press the software key for "BK" to delete entered value.
Press the software key for "OK" when all settings are complete.
Note: The terminal will not display the entered value as numbers,
but will instead display them as asterisks (*).
Exit
Exit
VOL.3-670
CHAPTER 4 CONFIGURATION SETUP