NEC Univerge sv8500 Manual page 2872

Parameter
1. LAN Port Settings
1. Speed & Duplex (LAN)
1. Autonego
2. 100M Full
3. 100M Half
4. 10M Full
5. 10M Half
2. VLAN Mode (LAN)
1. Disable
2. Enable
3. VLAN ID (LAN)
4. VLAN Priority (LAN)
2. PC Port Settings
1. Speed & Duplex (PC)
1. Autonego
2. 100M Full
3. 100M Half
4. 10M Full
5. 10M Half
2. VLAN Mode (PC)
1. Disable
2. Enable
3. VLAN ID (PC)
4. VLAN Priority (PC)
5. Port Available (PC)
0. Automatic
1. ON
2. OFF
Setting LAN port.
Setting LAN speed.
Auto-Negotiation
Fixed to 100 Mbps and Full Duplex mode.
Fixed to 100 Mbps and Half Duplex mode.
Fixed to 10 Mbps and Full Duplex mode.
Fixed to 10 Mbps and Half Duplex mode.
Enable or disable VLAN.
VLAN is disabled.
VLAN is enabled.
VLAN ID setting.
VLAN Priority setting.
Setting PC port.
Setting LAN speed.
Auto-Negotiation
Fixed to 100 Mbps and Full Duplex mode.
Fixed to 100 Mbps and Half Duplex mode.
Fixed to 10 Mbps and Full Duplex mode.
Fixed to 10 Mbps and Half Duplex mode.
Enable or disable Port VLAN for PC port.
Disable PC Port VLAN.
Enable PC Port VLAN.
Setting PC Port VLAN ID.
Setting PC Port VLAN Priority.
Enable or disable PC port.
According to the direction from the System. If there is no
direction, PC port is enabled.
According to the setting on DtermIP/IP Enabled Dterm. (PC
port is enabled.)
According to the setting on DtermIP/IP Enabled Dterm. (PC
port is disabled.)
VOL.3-385
CHAPTER 4
Description
CONFIGURATION SETUP
Default
-
Autonego
Disable
7
5
-
Autonego
Disable
7
5
Automatic