NEC Univerge sv8500 Manual page 3002

14. POWER CONTROL
This item specifies the power control of the CONSOLE in the night mode.
(a) Press the desired number. An asterisk (*) shows the selected number.
1. Power control is not effective.
2. The LCD back light is put out. When pressing any key, the LCD back light is put on, the light is put out
again after 30 seconds.
SRC Return to the Configuration Menu
Default setting is "1: NORMAL".
Note 1:
(b) Press the SRC key. The display returns to Configuration Menu.
(c) When configuration data assignment is completed, proceed to UPDATING CONFIGURATION
DATA. When the other item is also specified, return to SELECTION OF CONFIGURATION ITEM.
15. CONF.TONE FOR ALL KEYS
This item specifies the confirmation tone control for all keys of the CONSOLE.
(a) Press the desired number. An asterisk (*) shows the selected number.
1. Confirmation tone is enable for all keys.
2. Confirmation tone is disable for all keys.
3. Confirmation tone is controlled by the system.
[POWER CONTROL]
*1: NORMAL
Note 1
2: LOW POWER (PUT OUT LCD)
[CONFIG MENU P5] VER x
1: FUNCTION KEY SWAP
2: RINGER VOLUME IN PB
3: POWER CONTROL
[CONF. TONE FOR ALL KEYS]
*1: ENABLE
Note 1
2: DISABLE
3: SYSTEM
CHAPTER 4
SRC: menu
SRC: prev page
DEST: next page
Release: exit
Answer: update
SRC: menu
VOL.3-515
CONFIGURATION SETUP