NEC Univerge sv8500 Manual page 2900

A
STEP 5: "Factory Value Set?" is displayed. Press OK key.
By pressing the OK key, the display automatically returns to the Administrator Menu.
On the Administrator Menu, press Exit key to return to the User Menu.
STEP 6: Select "DHCP Mode" by pressing "1" key on the User Menu.
STEP 7: Select "Enable (Auto BackUp)" by pressing "4" key.
3. Enable (w/ Spare IP)
4. Enable (Auto BackUp)
Up Down
Check to see that "4. Enable (Auto BackUp)" is flashing, and press OK key to return to the User Menu.
STEP 8: Select "2. DRS Address Primary" by pressing "2" key on the User Menu.
B
Factory Value Set?
Cancel OK
[User Menu]
1. DHCP Mode
2. DRS Address Primary
Up
Down Cancel Save
OK
Cancel
[User Menu]
2. DRS Address Primary
3. BackUp-DRS Address
Up
Down Cancel Save
VOL.3-413
CHAPTER 4 CONFIGURATION SETUP
1. Disable
Up
2. Enable
3. Enable (w/ Spare IP)
4. Enable (Auto BackUp)
Up Down Cancel Save
Down